Le test CompTIA JK0-U31 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test CompTIA JK0-U31. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test CompTIA JK0-U31. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.
Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de CompTIA JK0-016 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.
Le Certificat CompTIA JK0-016 est un passport rêvé par beaucoup de professionnels IT. Le test CompTIA JK0-016 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test CompTIA JK0-016. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test CompTIA JK0-016 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A CompTIA JK0-016 pour prendre un essai.
Code d'Examen: JK0-U31
Nom d'Examen: CompTIA (CompTIA E2C Strata IT Technology Exam)
Questions et réponses: 276 Q&As
Code d'Examen: JK0-016
Nom d'Examen: CompTIA (CompTIA Network+(2009 Edition) Exam)
Questions et réponses: 700 Q&As
Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test CompTIA JK0-U31. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A CompTIA JK0-U31 de Pass4Test.
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification CompTIA JK0-U31. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test CompTIA JK0-U31.
Le test CompTIA JK0-U31 est l'un très improtant dans tous les tests de Certification CompTIA, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
JK0-U31 Démo gratuit à télécharger: http://www.pass4test.fr/JK0-U31.html
NO.1 Which of the following features are related to power management? Each correct answer
represents a complete solution. Choose two.
A. Hot plugging
B. Hibernate mode
C. Standby mode
D. Safe mode
Answer: B,C
CompTIA examen certification JK0-U31 certification JK0-U31 JK0-U31 examen JK0-U31 JK0-U31 examen
Explanation:
The Hibernate mode and Standby mode are features related to power management. Hibernate
mode is a power saving feature for computers. In hibernate mode, the current state of a computer
is saved to the hard disk, and the computer shuts down. A user will have to power on the computer
to restore the previous settings. When a computer resumes from hibernate mode, it reads the
saved settings from the disk and restores the system state as it was before it entered hibernate
mode. By default, hibernate mode is disabled. If a computer is not ACPI-enabled or APM-enabled,
users will have to enter hibernate mode manually. Users cannot set the computer to automatically
hibernate after a certain time. With ACPI-enabled and APM-enabled computers, users are able to
set hibernate mode automatically. The standby mode is a power saving feature for computers. In
this mode, a computer does not shut down completely. The computer goes to low power state and,
as a result, it consumes less power. When the computer resumes from the standby mode, full power
is restored to its devices. During the standby mode, if the power supply
is disconnected or interrupted, data might be
lost. The standby mode is available automatically on ACPI-enabled or APM-enabled computers.
Users do not need to enable this mode manually. This mode is not available in non-ACPI and
non-APM based computers. Answer option A is incorrect. Hot plugging is a feature in which a device
can be installed or removed while the computer is running. Answer option D is incorrect. Safe Mode
is a Windows feature used to start a computer with basic drivers, such as mouse, keyboard, etc. It
bypasses blocking issues, such as system corruption, or installation of incompatible drivers or
system services, enabling the Administrator to resolve such issues.
NO.2 Which of the following is an international standard for energy efficient consumer products?
A. Energy Star rating
B. Standby mode
C. Trusted Computer System Evaluation Criteria (TCSEC)
D. Advanced Configuration and Power Interface (ACPI)
Answer: A
CompTIA examen JK0-U31 examen JK0-U31
Explanation:
Energy Star rating is an international standard for energy efficient consumer products. The Energy
Star rating is an international standard for energy efficient consumer products. Devices carrying
the Energy Star logo are products, such as computer devices, peripherals, kitchen appliances, etc.
These products generally use 20% to 30% lesser energy than required by the federal standards. The
Energy Star program was created by the 'United
States Environmental Protection Agency' (US EPA) as an attempt to reduce energy consumption and
greenhouse gas emission by power plants. The program has helped in spreading the use of LED
traffic lights, efficient fluorescent lighting, and power management systems for office equipments.
Answer option C is incorrect. Trusted Computer System Evaluation Criteria (TCSEC), frequently
referred to as the Orange Book, is the centerpiece of the DoD Rainbow Series publications. It is a
United States Government Department of Defense (DoD) standard that sets basic requirements for
assessing the effectiveness of computer security controls built into a computer system. TCSEC was
used to evaluate, classify and select computer systems being considered for the processing, storage
and retrieval of sensitive or classified information.
It was replaced with the development of the Common Criteria international standard originally
published in 2005. Answer option B is incorrect. The standby mode is a power saving feature for
computers. In this mode, a computer does not shut down completely. The computer goes to low
power state and, as a result, it consumes less power. When the computer resumes from the standby
mode, full power is restored to its devices. During the standby mode, if the power supply is
disconnected or interrupted, data might be lost. The standby mode is available automatically on
ACPI-enabled or APM-enabled computers. Users do not need to enable this mode manually. This
mode is not available in non-ACPI and non-APM based computers. Answer option D is incorrect. The
Advanced Configuration and Power Interface (ACPI) is a power- management specification
developed by Intel, Microsoft, and Toshiba. It enables an operating system to control the amount of
power supplied to each device attached to a computer by turning off peripheral devices when they
are not in use. It defines power management on a wide range of mobile,
desktop, and server computers and peripherals. It also enables manuurers to produce computers
that automatically power up as soon as a user touches the keyboard.
Reference: "http.//en.wikipedia.org/wiki/Energy_Star"
NO.3 Which of the following ports on a computer are used to connect a keyboard? Each correct
answer represents a complete solution. Choose two.
A. USB
B. DB-25
C. PS/ 2
D. DB-9
Answer:
A, C
Explanation:
The PS/ 2 and USB ports on a computer are used to connect a keyboard. What is USB? Universal
Serial Bus (USB) is a high speed bus standard developed by Compaq, IBM, DEC, Intel, Microsoft, NEC,
and Northern Telecom. It provides the Plug and Play capability of Windows to external hardware
devices. USB supports hot plugging, which means that a USB device can be installed or removed
while the computer is running. A single USB port can be used to connect up to 127 peripheral
devices, such as CD-ROM drives, tape drives, keyboards, scanners etc. USB 1.1 has a maximum data
transfer rate of 12 Mbps, whereas USB 2.0 has a maximum data transfer rate of 480 Mbps. USB 2.0
is fully backward compatible with USB 1.1. Answer options D and B are incorrect. The DB-9 and
DB-25 port types on the computer are used as serial ports. A DB-9 male type port has 9 pins,
whereas a DB-25 male type port has 25 pins. What is a serial port? Serial port is the primary means
for connecting modems and mouse to a computer. There are two types of serial port connectors,
9-pin and 25-pin. The word serial refers to the data is sent in series, one bit at a time, over a single
wire. This design is significantly slower than sending 8 bits at a time via a parallel channel, but serial
signals can travel much farther without degradation.
NO.4 Which of the following devices can cause great harm to one's life with lethal electric shocks?
Each correct answer represents a complete solution. Choose two.
A. SMPS
B. Floppy drive
C. Monitor
D. Keyboard.
Answer: A, C
certification CompTIA certification JK0-U31 JK0-U31 examen certification JK0-U31
Explanation:
A computer monitor and SMPS are at high voltage. Therefore, these devices can be fatal. They
usually have large amount of electric charge stored in capacitors for days after they have been
unplugged from power source. What is SMPS? Switch Mode Power Supply (SMPS) is a device that
converts raw input power to controlled voltage and current for the operation of electronic
equipment. SMPS uses switches for high efficiency. Answer options D and B are incorrect.
Keyboards and floppy drives do not store electric charge. Therefore, they cannot cause lethal
electric shocks.
NO.5 You are handling IT support for a sales company. One of the sales representatives complains
that his laptop does not have a network card. You wish to add one via an expansion slot. What type
of expansion card should you use?
A. MCA
B. PCMCIA
C. PCI
D. AGP
Answer: B
certification CompTIA certification JK0-U31 JK0-U31 examen JK0-U31 examen
Explanation:
PCMCIA is a widely used expansion card slot for laptops. What is PCMCIA card? Personal Computer
Memory Card International Association (PCMCIA) card is also known as PC card. The PC card uses a
small expansion slot and is primarily used in laptops. However, PC cards are also available in some of
the desktop computers. There are three types of PCMCIA cards. 1.Type I 2.Type II 3.Type III Answer
option C is incorrect. PCI slots are used in PC's, not laptops. Answer option D is incorrect. AGP is a
legacy
graphics slot for PC's. What is AGP (Accelerated Graphics Port)? AGP is a high speed 32-bit bus
designed for high performance graphics and video support. It allows a video card to have direct
access to a computer's RAM, which enables fast video performance. AGP provides a bandwidth of
up to 2,133 MB/second. Answer option A is incorrect. MCA is a legacy PC slot.
Reference:
http.//www.wisegeek.com/what-is-an-expansion-card.htm
NO.6 Which of the following can be used to accomplish authentication? Each correct answer
represents a complete solution. Choose all that apply.
A. Biometrics
B. Encryption
C. Password
D. Token
Answer: A,C,D
certification CompTIA JK0-U31 examen certification JK0-U31 JK0-U31 examen JK0-U31 examen
Explanation:
The following can be used to accomplish authentication.
1.Password
2.Biometrics
3.Token A password is a secret word or string of characters that is used for authentication, to prove
identity, or gain access to a resource. What is authentication? Authentication is a process of
verifying the identity of a person, network host, or system process. The authentication process
compares the provided credentials with the credentials stored in the database of an authentication
server. What is biometrics?Biometrics is a method of authentication that uses physical
characteristics, such as fingerprints, scars, retinal patterns, and other forms of biophysical qualities
to identify a user. Nowadays, the usage of biometric devices such as hand scanners and retinal
scanners is becoming more common in the business environment. A token may be a physical device
or software token that an authorized user of computer services is given to ease authentication.
Answer option B is incorrect. Encryption can be used to accomplish security and not authentication.
NO.7 You are working with a team that will be bringing in new computers to a sales department at
a company. The sales team would like to keep not only their old files, but system settings as well on
the new PC's. What should you do?
A. Do a system backup (complete) on each old machine, then restore it onto the new machines.
B. Use the Disk Management tool to move everything to the new computer.
C. Use the User State Migration tool to move the system settings and files to the new machines.
D. Copy the files and the Windows Registry to a removable media then copy it onto the new
machines.
Answer: C
CompTIA examen JK0-U31 JK0-U31 examen JK0-U31
Explanation:
The User State Migration Tool is made specifically for this purpose. Large scale migrations require
not only files but system settings to be moved to new machines and Microsoft created this tool for
this purpose. What is User State Migration Tool (USMT)? User State Migration Tool (USMT) is used
to migrate user files and settings during large deployments of Microsoft Windows XP and Microsoft
Windows Vista operating systems. It captures desktop, and application settings, as well as user
accounts and users' files, and then migrates them to a new Windows installation. It helps
administrators to improve and simplify migration process. USMT can be used for both side-by-side
and wipe-and-load migrations. USMT component SCANSTATE.EXE
is used to collect the files and settings from the source computer and the LOADSTATE.EXE
component is used to restore the user state onto the destination computer. Answer option D is
incorrect. Moving the Windows registry will not work and could in cause major problems on the
new system. This is especially true if the new system has a more modern version of Windows.
Answer option B is incorrect. The disk management
tool is used for managing disk partitions. Answer option A is incorrect. A complete backup will likely
cause problems on the new installations. This is especially true if the new system has a more
modern version of Windows.
Reference: http.//technet.microsoft.com/en-us/library/bb457090.aspx
NO.8 Which of the following statements about a riser card is true?
A. It is used to connect a computer in a network.
B. It is used to connect extra microprocessors.
C. It provides extra memory for expansion cards.
D. It is used to extend slots for expansion cards.
Answer: D
CompTIA examen JK0-U31 certification JK0-U31 certification JK0-U31
Explanation:
Riser card is a circuit board that is used to extend slots for expansion cards and provides the ability
to connect additional expansion
cards to the computer. These cards are used with LPX motherboards.
With the introduction of ATX motherboards, riser cards are rarely used. In ATX motherboards, the
expansion cards
connect directly to the computer motherboard instead of using riser cards. What is
LPX? LPX is a motherboard form or that is used in some desktop computers. In
LPX motherboards, expansion cards are inserted into a riser card that contains several
slots. Unlike other common form ors such as AT and ATX, the expansion cards in LPX
are not vertical, but parallel to the motherboard. The LPX form or is designed for
smaller cases, and usually it is used for connecting two or three expansion cards.
没有评论:
发表评论